Chicken Feather Removal Machine
Chicken feather removal machine instructions for use:1. Check the parts after unpacking. If the screws are loose during transportation, re-reinforce them….
Chicken Feather Removal Machine of boiled water
Technical parameter of Chicken Defeathering Machine XF-65:
- Voltage: 220v,
- power: 3800 watts of boiling water,
- 1500 watts of hair removal machine (different models are different in power,)
- dimensions: 1300*550*1000mm
Chicken Defeathering Machine Instructions for use:
- Check the parts after unpacking. If the screws are loose during transportation, re-reinforce them. Turn the chassis by hand to see if it is flexible, otherwise adjust the drive belt.
- After the position of the machine is set, install a knife switch grounding socket on the wall of the machine side, and then run the machine for 5 minutes.
- when the chicken and duck slaughter, the knife edge to kill as small as possible, after slaughter, first put the chicken and duck in warm water (about 30 ° C) dipped, so that the plumage soaked, it is best to put a little salt in warm water. To avoid damage to the epidermis during hair removal.
- Place the soaked chicken (duck) in hot water at around 75 °C. Stir with a wooden stick to make it hot evenly. Then put it into the hair removal machine, and then 1-5 can be placed at a time. (One is only better for plucking)
- hit the knife switch, the machine starts, while running, while entering water from the inlet pipe, spraying on the chicken (duck), you can also add water by hand (hot water is appropriate), take off the feather dirt along with the water flow Discharge (water can be recycled), it can be removed in 1-2 minutes.